LED Face and Neck Mask - 5 Wavelengths
LED Face and Neck Mask - 5 Wavelengths
LED Face and Neck Mask with 5 wavelengths and 147 LEDs. This set includes a face mask (90 LEDs) and detachable neck piece (57 LEDs) with wireless LCD controller.
Wavelengths: 415nm (blue), 590nm (yellow), 630nm (red), 850nm (near-infrared), 1072nm (near-infrared). Features 6 preset modes, 3 brightness levels (50%, 75%, 100%), and optional 10Hz pulse function. Each session runs for 10 minutes with automatic shutoff.
Powered by 5000mAh rechargeable battery providing 5-7 sessions per charge. Charges via USB-C in 2-3 hours. Face mask dimensions: 345 × 225 mm. Neck piece dimensions: 492 × 149 mm. Material: medical-grade silicone.
Package includes: LED face mask, LED neck piece, wireless LCD controller, USB-C charging cable, adjustable strap, carrying bag, and user manual.
5 Wavelengths
6 Preset Modes
Full Specifications
What's In The Box
Manufacturing Standards
This device is manufactured in certified facilities meeting the following international safety and quality standards:
*Certifications held by manufacturing facility
How To Use
Peel off the dustproof film from LED panels on face mask and neck piece
Place mask on face, position neck piece, and secure with adjustable strap
Connect to controller, press power for 3 seconds, select mode. 10-min auto session.
- Power: Press and hold for 3 seconds to turn on
- Brightness: Short press to cycle (50%, 75%, 100%)
- Timer: Each mode runs for 10 minutes automatically
- Mode Selection: Press power to switch between 6 modes
- Pulse: Press pulse button for 10Hz pulse function
- Auto Shut-off: Device turns off after session ends
Important Safety Information
- Are pregnant, preparing for pregnancy, or breastfeeding
- Have light sensitivity or are taking any medication that may cause photosensitivity
- Have hereditary diseases of the eye (such as lupus erythematosus, photosensitive eczema, albinism, etc.)
Place the device on your arm and turn on for 10 minutes. If redness or itching appears, stop using. Consult a dermatologist before using again.
Clean your face and keep it dry (without makeup). Photosensitive ingredients in cosmetics may affect the session.
Mild redness is normal and will return to normal within 1-2 hours. If you feel burning or discomfort, stop immediately.
Frequently Asked Questions
LED Face Mask (90 LEDs), LED Neck Piece (57 LEDs), Wireless LCD Controller, USB-C Charging Cable, Adjustable Head Strap, Storage Bag, User Manual, and Gift Box.
Each session is 10 minutes. The device automatically shuts off when complete.
Start with 3-4 sessions per week. Allow at least one day between sessions when starting out.
Wipe the inside with a soft, slightly damp cloth after each use. Never submerge in water. Allow to air dry completely before storage.
The 5000mAh battery provides 5-7 full sessions per charge. Charging takes approximately 2-3 hours via USB-C.
Mode 1: 630nm only. Mode 2: 590nm + 630nm. Mode 3: 630nm + 850nm + 1072nm. Mode 4: 590nm + 630nm + 850nm + 1072nm. Mode 5: 415nm only. Mode 6: All wavelengths sequential.
415nm (Blue), 590nm (Yellow), 630nm (Red), 850nm (Near-Infrared), and 1072nm (Near-Infrared). Each wavelength has different light properties.
Use the mask on clean, dry skin. Apply any skincare products after your session.
The mask features eye cutouts. Keep your eyes closed during use for comfort.
FDA 510(K) registered, CE marked, and compliant with IEC 60601 standards.
The wireless controller has three brightness levels: 50%, 75%, and 100%. Press the brightness button to cycle through options.
The pulse function delivers light at 10Hz frequency. This can be activated using the PULSE button on the controller.